Arctic Hayes Gas Leak Detection Spray 400ml
Arctic Hayes Gas Leak Detection Spray 400ml provides a quick and effective way to identify positive-pressure leaks in pipework and fittings. The specialist formula creates micro-porous foam, which immediately highlights even very small leaks.
Unlike traditional immersion testing, this aerosol allows engineers to test components directly in position. Therefore, it saves time and simplifies leak checking during installation, servicing and maintenance.
Furthermore, Arctic Hayes formulates the spray for use with gas, air and nitrogen systems. The solution is both non-flammable and non-corrosive, making it ideal for professional plumbing and heating applications.
Why Choose Arctic Hayes Gas Leak Detection Spray?
Quickly Highlights Small Leaks
The micro-porous foam reacts around escaping gas or air. Consequently, bubbles quickly reveal the position of even small leaks.
No Need to Submerge Components
Traditional leak testing may require parts to sit underwater. However, Arctic Hayes Leak Detector Spray allows direct testing on installed pipework and fittings.
High-Powered Aerosol Application
The aerosol delivery system provides a strong and controlled application. Therefore, engineers can quickly coat the area that requires testing.
Suitable for Gas, Air and Nitrogen
Arctic Hayes specifies the product for identifying leaks in gas, air and nitrogen systems. As a result, one can supports several common professional testing applications.
Non-Flammable Formula
The leak detection fluid is non-flammable. Therefore, it provides a practical solution for suitable gas installation and servicing work.
Non-Corrosive
The specialist formulation is also non-corrosive. Consequently, it suits use on compatible pipework and fittings without introducing an aggressive cleaning chemical.
Suitable for Confined Areas
Arctic Hayes states that the spray is safe to use in confined areas when used correctly. Nevertheless, always follow the product instructions and relevant workplace safety requirements.
Key Features
- Genuine Arctic Hayes product
- 400ml aerosol can
- Product code PH020
- Detects positive-pressure leaks
- Suitable for gas systems
- Suitable for compressed air
- Suitable for nitrogen
- Micro-porous foam highlights small leaks
- High-powered aerosol application
- No immersion testing required
- Non-flammable
- Non-corrosive
- Suitable for confined areas
- Meets BS EN 14291:2004 requirements
- Professional trade product
- Not suitable for medical oxygen
Technical Specification
- Manufacturer: Arctic Hayes
- Product: Leak Detector Spray
- Product Code: PH020
- Can Size: 400ml
- Delivery: Aerosol
- Application: Positive-pressure leak detection
- Suitable Media: Gas, Air and Nitrogen
- Leak Indication: Micro-porous Foam
- Flammable: No
- Corrosive: No
- Standard: Meets BS EN 14291:2004
- Medical Oxygen: Not Suitable
What Does Gas Leak Detection Spray Do?
Gas leak detection spray provides a visual method of checking pipework, fittings and joints for escaping gas.
Firstly, apply the spray to the area under test. The solution then forms a foam across the surface.
If gas escapes through a joint, the leak creates visible bubbles within the foam. Therefore, the engineer can quickly identify the exact location of the problem.
This method provides a clear visual indication without requiring the component to be removed or submerged in water.
Micro-Porous Foam for Accurate Leak Detection
Small leaks can prove difficult to identify without a suitable testing product.
Arctic Hayes uses a micro-porous foam formulation that reacts immediately around escaping pressure. As a result, even small leaks become easier to locate.
Furthermore, the foam remains visible while the engineer examines the joint. This makes it particularly useful when testing fittings during installation, maintenance or servicing.
Suitable for Gas Systems
The Arctic Hayes PH020 Leak Detector Spray suits professional gas installation and servicing work.
For example, engineers can use it to check compatible:
- Pipe joints
- Gas fittings
- Threaded connections
- Valves
- Appliance connections
- Pipework
- Service connections
Furthermore, the non-flammable formula makes it suitable for appropriate gas leak detection applications.
Always follow current gas safety procedures and manufacturer requirements when testing any gas installation.
Suitable for Compressed Air Systems
Leaks within compressed air systems can reduce performance and waste energy.
Therefore, quickly locating leaking fittings helps maintain reliable system operation.
Arctic Hayes specifically lists air leaks among the suitable applications for PH020. Consequently, engineers can use the spray to inspect compatible compressed air joints and fittings.
Suitable for Nitrogen Leak Testing
Nitrogen commonly appears during pressure testing and servicing across heating, refrigeration and other technical systems.
Arctic Hayes confirms that PH020 suits nitrogen leak detection. Therefore, it provides a useful consumable for engineers carrying out appropriate pressure tests.
Apply the spray to the connection under test and watch for bubble formation around potential leak points.
No Need for Immersion Testing
Traditional leak detection sometimes involves placing a component into water and watching for bubbles.
However, installed pipework and fittings cannot always be removed easily.
Arctic Hayes Leak Detector Spray solves this problem by allowing direct application to the connection. Consequently, engineers can test joints while they remain in position.
This approach can reduce testing time and simplify fault finding.
BS EN 14291:2004 Requirements
Arctic Hayes states that PH020 meets the requirements of BS EN 14291:2004.
This standard relates to foam-producing solutions for leak detection on gas installations.
Therefore, the product provides a professional solution for appropriate gas testing work.
Engineers should always follow current regulations, manufacturer instructions and recognised gas safety procedures.
Ideal Applications
Arctic Hayes Gas Leak Detection Spray suits:
- Gas engineers
- Heating engineers
- Plumbers
- Boiler installation
- Boiler servicing
- Gas appliance maintenance
- Gas pipework testing
- Compressed air systems
- Nitrogen pressure testing
- HVAC servicing
- Refrigeration servicing where compatible
- Property maintenance
- Commercial maintenance
- Installation checks
- Fault finding
How to Use Leak Detection Spray
Firstly, make sure the area under test is accessible and suitable for the product.
Next, apply the spray directly across the joint, fitting or connection.
Then, observe the foam carefully. Escaping gas or air will create visible bubbles around the leak point.
Once testing is complete, follow the manufacturer’s instructions for cleaning or removing excess product where required.
Most importantly, always follow the appropriate safety procedure for the system under test.
Important Safety Information
Use Arctic Hayes Leak Detector Spray only for suitable applications and according to the manufacturer’s instructions.
The product suits gas, air and nitrogen leak detection. However, Arctic Hayes specifically states that it must not be used on medical oxygen systems.
Furthermore, never rely on leak detection spray as a substitute for required professional gas testing procedures.
Only suitably qualified engineers should carry out regulated gas installation and servicing work.
Why Use Professional Leak Detection Fluid?
Professional leak detection fluid provides several advantages over improvised testing methods.
Firstly, the specialist foam clearly shows escaping gas. Therefore, small leaks become easier to identify.
Secondly, the non-corrosive formulation helps protect compatible components during testing.
Furthermore, aerosol application provides fast coverage across joints and fittings.
Key benefits include:
- Fast visual leak identification
- Easy application
- Clear bubble formation
- No immersion required
- Suitable for installed pipework
- Useful during commissioning
- Ideal for servicing
- Suitable for fault finding
- Professional trade formulation
Related Products
Arctic Hayes Gas Pressure Test Equipment
Measure gas pressure accurately during professional installation, commissioning and servicing work.
Arctic Hayes Smoke Stick Kit 3
Carry out suitable airflow, draught and appliance spillage tests with a controlled smoke stream.
Arctic Hayes 3g White Smoke Cartridges
Produce dense white smoke for airflow, ventilation and flue-testing applications.
Arctic Hayes 5g White Smoke Cartridges
Choose a higher-output smoke cartridge when greater smoke coverage is required.
Arctic Hayes Landlord & Homeowners Record Pad
Complete appropriate gas safety documentation following servicing, inspections and appliance checks.
Arctic Hayes Gas PTFE Tape
Complete compatible threaded gas connections using purpose-designed gas sealing tape.
Isolation Valves
Create accessible isolation points throughout suitable plumbing and heating installations.
Plumbing & Heating Tools
Browse professional installation and servicing tools for everyday plumbing and heating work.
Why Buy Arctic Hayes Gas Leak Detection Spray from Kudos Trading?
Kudos Trading supplies professional plumbing, heating and testing products to engineers and installers throughout the UK.
Furthermore, our extensive range allows customers to buy specialist testing products alongside everyday servicing equipment and plumbing components.
When you order from Kudos Trading, you’ll benefit from:
- Genuine Arctic Hayes products
- Competitive UK prices
- Fast nationwide delivery
- Expert technical support
- Extensive product availability
- Friendly customer service
- Over 25 years of industry experience
Frequently Asked Questions
What is Arctic Hayes Gas Leak Detection Spray used for?
It helps locate positive-pressure leaks in pipelines, fittings and connections. Furthermore, the micro-porous foam provides a clear visual indication of escaping gas.
How much leak detection spray is supplied?
Each can contains 400ml of Arctic Hayes Leak Detector Spray.
What is the Arctic Hayes product code?
The manufacturer product code is PH020.
Can the spray detect gas leaks?
Yes. Arctic Hayes specifically formulates PH020 for suitable gas leak detection applications.
Can it detect air leaks?
Yes. The product suits positive-pressure air leak detection as well as gas and nitrogen systems.
Can Arctic Hayes Leak Detector Spray detect nitrogen leaks?
Yes. Arctic Hayes specifically lists nitrogen among the suitable applications.
How does the leak detector show a leak?
The spray creates micro-porous foam over the connection. Consequently, escaping gas or air produces visible bubbles at the leak point.
Do I need to submerge the fitting in water?
No. The spray allows direct testing of pipelines and fittings without submerging the component.
Is Arctic Hayes Leak Detection Spray flammable?
No. Arctic Hayes states that PH020 is non-flammable.
Is the leak detector spray corrosive?
No. The manufacturer describes the product as non-corrosive.
Can it be used in confined areas?
Arctic Hayes states that the spray is suitable for use in confined areas. However, always follow the product safety instructions and relevant workplace requirements.
Does the product meet a British Standard?
Yes. Arctic Hayes states that PH020 meets the requirements of BS EN 14291:2004.
Can I use this spray on medical oxygen systems?
No. Arctic Hayes specifically states that the product must not be used on medical oxygen.
Is this suitable for professional gas engineers?
Yes. PH020 provides a professional visual leak detection solution for appropriate gas installation and servicing applications.
Related Products
- Arctic Hayes Gas Pressure Test Equipment
- Arctic Hayes Smoke Stick Kit 3
- Arctic Hayes 3g White Smoke Cartridges
- Arctic Hayes 5g White Smoke Cartridges
- Arctic Hayes Smoke Matches
- Arctic Hayes Landlord & Homeowners Record Pad
- Arctic Hayes Gas PTFE Tape
- Gas Testing Equipment
- Isolation Valves
- Plumbing & Heating Servicing Tools
- Gas Engineer Consumables
Next Working Day Delivery: Yes, we hold all our products in stock at our 7000 sq ft Nottingham warehouse and at our 3000 sq ft warehouse in Market Harborough and use DPD for a tracked next-day delivery.
Collection Available: You can always collect from our Nottingham location and help yourself to a free tea and coffee
